TECTUS® 3D ADJUSTMENT
Vertical Adjustment : Step 1


Slightly loosen the clamping screws using the 4mm hex key.

Adjust the vertical position of the door by turning the lower height adjustment screw.
Turn the upper height adjustment screw in the opposite direction if necessary).
Retighten the clamping screws
Turn the upper height adjustment screw in the opposite direction if necessary).
Retighten the clamping screws

Adjust the spindles using a 4mm Allen key
Towards hinge : twist left (max. 3mm)
Towards lock : twist right (max. 3mm)
Towards hinge : twist left (max. 3mm)
Towards lock : twist right (max. 3mm)

Slightly loosen the fixing screws.
Put the door at the correct depth.
Retighten the clamping screws.
Put the door at the correct depth.
Retighten the clamping screws.